57 Years of Excellence

Building Components — Panels

Roof Panels

Long-life roof systems — from economical exposed-fastener panels to tested standing seam systems.

PBR-36 panel profile

Roof Panels

PBR-36

A 36" net coverage steel panel with 1-¼" high ribs at 12" on-center. Designed for application on roof or wall sub-structural members, typically at 5' on-center.

  • 26-gauge galvanized steel
  • 80 KSI yield strength
  • CERAM-A-STAR™ 1050 — 40-year SMP paint system
PrimeRib panel profile — 36 inch coverage, ¾ inch ribs at 9 inch on-center

Roof Panels

PrimeRib

A 36" net coverage steel panel with ¾" high ribs at 9" on-center. Designed for application on roof or wall sub-structural members, typically at 2' to 4' on-center.

  • 29-gauge galvanized steel
  • 80 KSI yield strength
  • CERAM-A-STAR™ 1050 — 40-year SMP paint system
TS-324 standing seam panel profile

Roof Panels

TS-324 Standing Seam

R & M Steel’s TS-324™ Standing Seam Roof System has been extensively tested to ensure the highest level of weather tightness and structural integrity — tested and approved by Factory Mutual™ and Underwriters Laboratories™ for wind uplift as well as hail and fire resistance. Three seam-type options — RollLok™, TripleLok™, and QuadLok™ — are specified per the project’s design and performance requirements.

  • 24-gauge Galvalume Plus and CERAM-A-STAR™ 1050 painted
  • Three seam options: RollLok™, TripleLok™, QuadLok™
  • Factory Mutual™ and UL™ tested for wind uplift, hail, and fire
  • Higher wind uplift resistance with 24-gauge panels than other systems using 22-gauge
VS-216 standing seam panel profile

Roof Panels

VS-216 Panelcraft Standing Seam

A precision roll-formed standing seam roof with 2" deep vertical ribs spaced 16" on-center, rated for a UL90® uplift rating when installed to roof support members. Floating panel clips allow thermal expansion and contraction, and factory-applied butyl mastic sidelaps give a continuous weather-tight seal.

  • 24-gauge pre-painted steel — CERAM-A-STAR™ 1050 40-year SMP
  • UL90® uplift rating (UL580)
  • Floating clips for thermal movement
  • Standard maximum panel length 50'-0"
Best Panel roof panel profile

Roof Panels

Best Panel

A 36" net coverage steel panel with ¾" high ribs at 9" on-center. Designed for application on roof or wall sub-structural members, typically at 2' to 4' on-center.

  • 29-gauge galvanized steel
  • 80 KSI yield strength
  • CERAM-A-STAR™ 1050 — 40-year SMP paint system
Architectural 16 panel profile — 16 inch coverage, 1 inch ribs

Roof Panels

Architectural 16 (A-16)

A 16" wide net coverage, concealed fastener panel. Designed for application over solid sheathing with a 30-lb felt paper underlayment; a flat-head fastener is applied at the side lap at 18" on-center.

  • 26-gauge galvanized steel
  • 50 KSI yield strength
  • CERAM-A-STAR™ 1050 — 40-year SMP paint system

Standing Seam

Roof Seamers

Standing seam roofs are closed with electric roof seamers. R & M Steel partners with DI Roof Seamers for seamer rentals and support — reserve a seamer through their rental program or visit our dedicated seamer portal.

Ready to Get Building?

Talk to our team about your project — quotes are free and there is no obligation.